A specialist Anthurium substrate designed to balance moisture distribution, aeration and fibrous root contact.

Two pine bark grades and chunky perlite create the coarse framework. New Zealand tree fern fibre, coco chips and 25% BioActive growing medium provide complementary moisture-retentive components.

• 15% New Zealand tree fern fibre: Adds a fibrous network for moisture distribution and root contact.
• Two bark sizes: 8 to 15 mm and 15 to 25 mm pine bark provide varied coarse structure.
• 25% chunky perlite: Low-dust European particles, approximately 5 to 15 mm, contribute an open mineral framework.
• 15% washed and buffered coco chips: Adds moisture retention through coarse 10 to 15 mm particles.
• 25% BioActive foundation: A complex growing medium containing materials such as composted plant matter, worm humus and biochar.
• Laboratory-informed development: A tested sample measured approximately pH 5.7 in water. This describes the tested sample, not a guaranteed value for every bag.
• Prepared in Prague: Measured, mixed, inspected and packed to a published volumetric recipe.

• Terrestrial and epiphytic Anthuriums suited to an open organic substrate
• Collector plants where a fibrous root environment is desired
• Ventilated pots with effective drainage
• Growers seeking a balance of graded bark, moisture-retentive components and fibre

Anthurium Mix or Supreme? Both contain 15% tree fern fibre. Anthurium Mix uses 20% bark across two grades, 25% perlite, 15% coco chips and 25% BioActive. Supreme Aroid Mix uses 15% small bark, 30% perlite, 10% coco chips and 30% BioActive. The difference is the whole formulation, not a different name on the same mix.

Use directly from the bag in a pot with effective drainage.

1. Choose a pot that fits the current root system without leaving a large unused volume.
2. Position the plant and fill loosely around the roots.
3. Tap the pot gently to settle the mix without compacting it.
4. Water thoroughly and allow excess water to drain.

Monitor moisture below the surface and water according to the plant, pot and environment. Avoid a fixed watering schedule.

Percentages by volume

• 25% BioActive growing medium
• 10% small pine bark, 8 to 15 mm
• 10% large pine bark, 15 to 25 mm
• 25% chunky European perlite, approximately 5 to 15 mm
• 15% washed and buffered coco husk chips, approximately 10 to 15 mm
• 15% New Zealand tree fern fibre