This rapid dripper fits directly into a classic moss pole to make top watering and fertilisation faster, cleaner and more consistent.

Instead of pouring into one point or down the outside of the pole, multiple outlets distribute water across the upper filling so moisture can move downward through the root zone.

It also carries correctly diluted mineral fertiliser directly to aerial roots growing inside the pole. This is a manual rapid-flow accessory, not an automatic irrigation system or slow-release reservoir.

• Top-down hydration: Waters the pole from the upper rooting zone, where moisture can progress through the filling.
• Multiple outlets: Distribute water over a wider area than an uncontrolled pour into one point.
• Rapid fixed flow: Waters efficiently during a manual session. Flow is not adjustable.
• Exact fit: Every version corresponds to one pole size and one rear closing position.
• Direct fertilisation: Delivers properly diluted, particle-free mineral fertiliser through the root zone.
• PETG construction: Suitable for repeated contact with water and correctly diluted fertiliser.

Single or extended PlantScraper classic moss poles filled with long-fibre sphagnum moss or moss pole filling mix.

The dripper also remains useful with a self-watering anchor set: the wick supports moisture from below while the dripper hydrates and feeds the upper root zone from above.

Match both pole size and rear closing position:

• S: Fixed shape; no position number.
• M: M1, M2 or M3.
• L: L1, L2, L3 or L4.
• XL: XL1, XL2, XL3 or XL4.

Position 1 is the narrowest rear closure; higher numbers create a progressively deeper pole. For anchored setups, use S, M2, L3 or XL3.

Not compatible with front-opening moss poles, coco poles or other manufacturers’ supports.

1. Confirm the pole size and inspect its rear closing position.
2. Leave approximately 2–3 cm of empty space above the filling.
3. Align the matching dripper with the top opening and press it gently into place.
4. Fill with clean water and allow it to drain through the filling.
5. Check moisture further down the pole before refilling.

Do not force the dripper. If it does not fit, recheck both the pole size and closing position.

One fill may be enough for a short pole. Tall or stacked poles may need several fills before lower sections are evenly moist. Stop before drainage overfills the pot, saucer or reservoir.

For feeding, use only clean, properly diluted and fully dissolved mineral fertiliser. Avoid organic fertilisers, thick mixtures and products containing particles, which may obstruct the outlets.

Rinse regularly, confirm that every outlet flows freely and remove mineral residue before it accumulates. Use water, mild soap and a soft brush when deeper cleaning is needed.

One PETG rapid dripper in the selected fit and colour.

• Fit options: S; M1, M2 or M3; L1, L2, L3 or L4; XL1, XL2, XL3 or XL4.
• Colour: Black or white.

Classic moss pole, sphagnum moss or moss pole filling mix, classic anchor, standard aroid pot, water and fertiliser are not included.

Compatible only with classic moss poles.